Bachelor of Engineering (Honours) Scheme in Product and Industrial Engineering
產品及工業工程(榮譽)工學士學位組合課程


Sept 2019 Entry

Programme code: JS3557

Duration and Credit Requirement


Mode of Study
Full-time
Normal Duration

4 years

Credits Required for Graduation

124 (plus 10 training credits)

Students may be required to take extra subjects in Physics depending on their entry qualifications.

Programme Intake
56 (JUPAS and non-JUPAS)
Fund Type
Government-Funded
Consider Second Choice Applications
Yes, but preference will be given to first choice applications.
Programme Leader(s)

Scheme Leader

Prof. C.Y. Tang
BSc, MSc, PhD

Programme Leader – BEng (Hons) in Product Engineering with Marketing

Prof. C.Y. Tang
BSc, MSc, PhD

Programme Leader – BEng (Hons) in Industrial and Systems Engineering

Dr Gary C.P. Tsui
BEng, PhD

Remarks
  • As the 2019/20 Academic Year is the start of the 2019-2022 triennium for which UGC-funded programmes are still subject to the Legislative Council's approval, the number of student intake places shown in this web page is indicative only and subject to change or confirmation at a later date.
  • Students admitted into the scheme will study the common curriculum for the first one and a half years. They will select any one of the two honours degree awards no later than the end of first semester of Year 2.
  • The credit requirements of this programme are indicative only. They are subject to review.
  • All information is subject to change without prior notice.

Aims and Characteristics

Two full-time programmes are offered under this scheme:

  • BEng(Hons) in Product Engineering with Marketing (BEng PEM)
  • BEng(Hons) in Industrial and Systems Engineering (BEng ISE)

 

BEng PEM

 

Programme Aims and Learning Outcomes

With decreasing time to market, increasing customer expectations and global competition, product design and development has become increasingly more complex in recent years. Today, product engineers carry out product design and development tasks that are not only limited to functional or engineering design but also need to incorporate the considerations of aesthetic issues, design for the product life cycle, technologies and business issues. There is now an urgent need to produce professionals in product development who can be innovative, knowledgeable and skillful enough to synergise product development with design, technology and business in developing successful new products.

 

To fulfil this need, the BEng(Hons) in Product Engineering with Marketing programme is designed to achieve the following aims and learning outcomes:

  • Provide integrated education and training to students for synergising product design, technology and business in new product development;
  • Enable students to develop their knowledge in business development, strategic product planning, product marketing and management, and understand how they relate to the development of successful new products; and
  • Supply graduates who are capable of product design and development, and can interact with customers, industrial designers, production personnel, suppliers and vendors, understand market situations and competition environments, and identify market needs and opportunities to convert them into new products that satisfy customer needs and all product engineering requirements.

 

 

Programme Characteristics

The programme provides comprehensive education and training in the development of successful new products in which graduates are able to synthesise product design, technologies and business issues.

 

Adopting an integrative and problem-based teaching and learning approach, the programme helps students to develop their knowledge in product design and development, and marketing, as well as their communication, team-playing, management and self-learning skills. Graduates are able to play leading roles in the industry by virtue of their well-balanced education and practical training.

 

BEng ISE

 

Programme Aims and Learning Outcomes

Industrial and Systems Engineering (ISE) is a professional discipline that focuses on developing and implementing optimal solutions from a system-level perspective. This involves people, technology, quality, finance, information, and environmental issues. The main role of Industrial and Systems Engineer is to organise and work harmoniously with others to streamline operational procedures, improve productivity and overall system performance. The ultimate goal is to increase efficiency, reduce operating costs, and increase customer satisfaction. ISE is different from other traditional engineering disciplines whereby knowledge and skills are applied to specific areas. For example, traditional manufacturing engineers usually work in a production environment. In contrast, ISE provides students with the opportunity to work in a variety of organisations in both the industrial and commercial sectors. In this connection, industrial and systems engineers have flexible career paths. ISE graduates are employed in organisations engaged in new product development, transportation, theme parks, logistics services, banks, public utilities, business development consultancy enterprises, government departments, etc. The ultimate objective of the ISE discipline is to provide leadership in the design of integrated industrial and commercial systems for the advancement and well-being of the community.

 

Programme Characteristics

Emphasis on student-centred learning and the integration of theory and practice are hallmarks of this programme.

 

In their final year, students can specialise in areas such as product engineering, logistics engineering, knowledge engineering, and product technology, through the selection of their Final Year Project and Electives, the latter of which are selected from a large pool of options.

 

In addition to the normal curriculum, Work-Integrated Education (WIE) is incorporated into the programme to ensure that students gain work experience relevant to their studies. This serves to enable students to better understand the relevance of their academic studies and to enhance all-round development.

 

Summer placement opportunities may be provided to students to enable them to gain practical work experience.

 

Students also have the opportunity to participate in the student exchange programme with universities in countries such as the United States, Canada, Sweden and Finland for one semester.

Curriculum

Year 1 (Common curriculum in this scheme)
Basic Mathematics I – Calculus and Probability and Statistics
Basic Mathematics II – Calculus and Linear Algebra
Information Technology
Physics I & II
Freshman Seminar for Engineering
Engineering Communication and Fundamentals
English I & II
CAR I & II
Healthy Lifestyle
Leadership and Intra-Personal Development
 
Year 2
BEng PEM BEng ISE
Chinese Communication Chinese Communication
Fundamentals of Materials Science and Engineering/Chemistry/Biology Fundamentals of Materials Science and Engineering/Chemistry/Biology
Mathematics I Mathematics I
Engineering Economics Engineering Economics
Quality Engineering Quality Engineering
Introduction to Marketing Electricity & Electronics
Elective 1* Introduction to Enterprise Computing
Electricity and Electronics Industrial Engineering Techniques & Methods
Society and the Engineer Systems Modeling & Simulation
Appreciation of Manufacturing Technologies Appreciation of Manufacturing Technologies
CAR III & IV CAR III & IV
   
Year 3
BEng PEM BEng ISE
Instrumentation and Product Testing Operations Research I
Introduction to Industrial Design Design for Manufacture & Sustainability
Integrated Design for Manufacture Materials & Processes Selection
Marketing Research Automation Technology
Integrated Product Engineering Project I Professional Communication in English
Engineering Management Professional Communication in Chinese
Professional Communication in English Planning for Production & Service Systems
Professional Communication in Chinese Engineering Management
Tool Design Product Safety and Reliability
Service-Learning Business Process Management
Integrated Project Service-Learning
  Integrated Project
   
Year 4
BEng PEM BEng ISE
New Product Planning and Development Society and the Engineer
Global Marketing Enterprise Resources Planning
Eco-design & Manufacture Project Management
Computer-Aided Product Design Engineering Costing & Evaluation
Business to Business Marketing Total Quality Management
Product Safety & Reliability Elective 1 & 2*
Elective 2 & 3* Individual Project
Capstone Project  
   
Elective Subjects: Elective Subjects:
Total Quality Management Computer-Aided Product Design
Advanced Mould and Die Design New Product Planning and Development
Advanced Manufacturing Technology Advanced Manufacturing Technology
Marketing Management in China Quality Management Systems
Sales Management Green Legislation and Supply Chain Logistics
Design in Business for Engineering Enterprise Systems and Strategy
Sustainable Product Design Managing Service Quality
   
* Select any THREE from the pool of elective subjects. * Select any TWO from the pool of elective subjects.

Recognition and Prospects

Professional Recognition

Both the BEng PEM and BEng ISE programmes have been granted provisional accreditation by the Hong Kong Institution of Engineers (HKIE) as a professional engineering degree programme recognized by other Washington Accord signatories.

The Washington Accord is an international agreement between bodies responsible for accrediting engineering degree programmes.  Currently, it has 18 signatories, including the United States, the United Kingdom, Australia, Canada, Japan, Korea, Singapore, Taiwan, Malaysia and New Zealand.

 

Career Prospects

 

BEng PEM

In recent years, many Hong Kong manufacturers have been switching from being low-cost original equipment manufacturers (OEMs) to high value-added original design manufacturers (ODMs), and even to original brand manufacturers (OBMs), to maintain their competitiveness and maximise their profit margins. This has led to a substantial demand for professionals to design and develop new products.

 

Our graduates have the abilities needed to work as product engineers, project engineers and product design engineers in the development of various kinds of products such as toys, domestic electrical appliances, health care products, electronic consumer products, audio/visual products, green products, power tools and automobile components.

 

BEng ISE

Graduates find employment as industrial engineers, systems engineers, project engineers, product development engineers, manufacturing engineers, logistics engineers, marketing engineers and costing engineers, or in various engineering and management trainee positions in government departments and utility companies before promotion to managerial positions.

Entrance Requirements

Please click here to view the entrance requirements for non-JUPAS applicants.

Enquiries

For further programme information, please contact:
Ms Becky Chan (tel: 3400 3838; email: becky.chan@polyu.edu.hk).

Student Message


My first year at PolyU was a thoroughly novel experience. I learned new things, grasped new chances and started a new life. Regarding knowledge, as Product Engineering with Marketing (PEM) is an engineering-based programme, I spent my first year consolidating my engineering knowledge in areas such as calculus and mathematics. However, PEM is not just about engineering. It enables students to design engineering products that can effectively satisfy consumers’ needs. Thus, I am going to learn industrial design, economics and marketing in the coming years.

 

Apart from regular classes, PEM students can also participate in various learning activities such as competitions, internship programmes and study tours. The most unforgettable experience I’ve had was a study tour to Taiwan. It was an invaluable chance to immerse myself in the village where I stayed and explore a new culture that is very different from that in Hong Kong.

 

In addition to learning, I started a new life at PolyU. I not only met many new friends, but also lived in a new place and enjoyed gaining independence while staying at Ho Man Tin Hall.


Wong Ka Lai



「產品工程兼市場學」是一個專門研究生產及製造產品的學科,而當中也會學習有關市場學的知識。課程的第一年,我們主要學習一些關於這門學科的基礎知識。除了基本的電學、力學等知識外,還有機會親手製造電路。

 

「產品工程兼市場學」除了提供產品生產、工程、設計方面的課程外,更會在第一個學年中為學員提供工程專題研習課程。在這個課程中,同學們甚至能夠從中學習到一些創業技巧。此外,學系還會經常邀請一些業界成功的工程師與同學分享個人經驗,除了能夠讓同學們更加了解自己的日後發展路向外,更能夠從他人身上汲取寶貴的人生經驗。

 

我相信完成四年的大學課程後,個人一定能夠對香港的工業發展作出貢獻,並進而創造出自己豐盛多彩的未來。


陳志達



Additional Documents Required


Programme Leaflet

Click here

Transcript / Certificate

Required


Interview Arrangement


Date: Between November 2018 and April 2019
Mode:Individual interview
Aims:

To evaluate the potential for and interest of applicants in the programme, and to assess their language and communication skills, and their learning attitude.

Medium:English
Duration:

About 10-15 minutes

Remark:

Suitable applicants will be invited to interview.